Dan D’Agostino Master Power 3+ Amplifier

3 Channel Power Amplifier

MSRP $17,500.00

The Master Power 3+ brings the acclaimed sound of Dan D’Agostino Master Audio Systems amplifiers to home theaters and advanced 2.1-channel stereo systems. Borrowing heavily from the amplification circuits D’Agostino developed for the Momentum amplifiers, the three-channel Master Power 3+ adds flexible crossover, bussing and bridging capabilities that optimize it for any system, from traditional two-channel to the immersive sound of Dolby Atmos and DTS X.

See PDF download and additional manufacturer details in the drop-down display below.

 

Dan D’Agostino Master Power 3+ Amplifier - Details

The Master Power 3+ brings the acclaimed sound of Dan D'Agostino Master Audio Systems amplifiers to home theaters and advanced 2.1-channel stereo systems. Borrowing heavily from the amplification circuits D'Agostino developed for the Momentum amplifiers, the three-channel Master Power 3+ adds flexible crossover, bussing and bridging capabilities that optimize it for any system, from traditional two-channel to the immersive sound of Dolby Atmos and DTS X.

The switchable crossover filters the bass out of any channel to drive satellite speakers—or the mids and treble out of any channel to drive a subwoofer. Of course, any or every channel can run full-range, too. A single audio signal can be routed to one, two or all three channels. Channels 2 and 3 can be bridged to deliver 1,000 watts into 8 ohms. Power can be controlled through a 12-volt trigger input or through RS-232, and the Master Power 3+ is rack-mountable.

Like the Momentum amplifiers, the Master Power 3+ is built by hand in D'Agostino's Arizona factory, using expensive through-hole construction for the best possible sound quality and reliability.

Download the Product Manual here: (we also included the link to the manufacturer's site and 2 others below)

Dan D’Agostino Master Power 3+ Amplifier Manual - PDF

 

Drawings View/Download
RS232 Download
Owner's Manual Download
Specifications
Finish Silver
Black
Custom Finishes Available Upon Request
Power 300 watts @ 8Ω
600 watts @ 4Ω
1200 watts @ 2Ω
Bridged Power 1,000 watts @ 8Ω
(Channels 2 + 3)
Frequency Response 1 Hz to 200 kHz, -1 dB
20Hz to 20 kHz, ±0 dB
Crossover Filters 80 Hz, -18 dB/octave
Distortion < 0.1% at 1 kHz
300 watts/8 ohms
Signal-to-Noise Ratio 100 dB, unweighted
Inputs 3 balanced XLR
(XLR to RCA adapters supplied)
Input Impedance 100KΩ
Output Impedance 0.12Ω
Dimensions 11.5 x 19 x 20 inches
Weight 128 lbs.
Drawings View/Download
RS232 Download
Owner's Manual Download
Print Friendly, PDF & Email